- Write by:
-
Thursday, September 9, 2021 - 14:13:36
-
741 Visit
-
Print
Mining News Pro - A new study published in the journal Joule makes the case for a record-breaking lithium metal battery that offers extremely high energy density of 560 watt-hours per kilogram — based on the total weight of the active materials — with remarkably good stability.
The battery is being developed by researchers at the Helmholtz Institute Ulm (HIU) and the Karlsruhe Institute of Technology who have used a promising combination of cathode and electrolyte: a nickel-rich cathode allows a lot of energy per mass to be stored and an ionic liquid electrolyte ensures that the capacity is largely retained over many charging cycles.
In detail, the scientists are using a low-cobalt, nickel-rich layered cathode (NCM88), which provides high energy density. The element, thus, substitutes the commonly used commercially available organic electrolyte (LP30), whose stability tends to be low.
“In the LP30 electrolyte, particle cracks occur on the cathode. The electrolyte reacts within these cracks and destroys the structure. In addition, a thick, moss-like lithium-containing layer forms on the anode,” Stefano Passerini, head of the battery electrochemistry research group at the HIU, said in a media statement. “Our researchers, therefore, used a non-volatile, non-flammable ionic liquid electrolyte with two anions (ILE) instead.”
According to Passerini and his team, the ILE allows for the structural changes in the nickel-rich cathode to be significantly reduced.
In their paper, the group reports that with the cathode NCM88 and the electrolyte ILE, the lithium metal battery achieves an energy density of 560-watt hours per kilogram (Wh / kg) — based on the total weight of the active materials. The device also has an initial storage capacity of 214 milliampere hours per gram (mAh / g) and 88%of the capacity is retained over 1,000 charging cycles.
At the same time, the Coulomb efficiency, which indicates the ratio between the withdrawn and supplied capacity, averages 99.94%.
“Since the presented battery is also characterized by a high level of safety, the researchers from Karlsruhe and Ulm have thus taken an important step on the way to carbon-neutral mobility,” the statement reads.
Short Link:
https://www.miningnews.ir/En/News/616528
BHP Group Ltd.’s proposal for a $39 billion takeover of rival Anglo American Plc is all about securing plenty of copper ...
Marex Group Plc and a group of the London-based firm’s shareholders raised about $292 million in a US initial public ...
China’s Tianqi Lithium said on Thursday it has formally requested that a proposed joint venture between lithium company ...
India is in talks with several countries seeking partnerships for technical help on lithium processing, said four ...
Eramet subsidiary SLN’s nickel mining operations in northern New Caledonia have been suspended, adding to difficulties ...
Aurubis AG, Europe’s largest refined copper producer, has started a project in its Bulgarian smelter which will expand ...
Chile’s state copper company Codelco defended its proposed lithium production tie-up with SQM in response to criticism ...
Brazilian miner Vale on Wednesday said lower prices for iron ore, nickel and copper in the first quarter dragged down ...
BHP Group Ltd. proposed a takeover of Anglo American Plc that values the smaller miner at £31.1 billion ($38.8 billion), ...
No comments have been posted yet ...